How to calibrate an external touchscreen in Windows

In Windows 10 and 11, first check that Windows sees the touch controller. Then assign touch to the correct monitor. Run calibration if taps still land away from their targets.

1. Check that Windows detects touch

Connect the video and touch interfaces specified by the display. For a display that uses a separate USB touch cable, connect it to the correct upstream port. For a standard Windows HID controller, look under Human Interface Devices in Device Manager for HID-compliant touch screen. Some panels use a manufacturer driver and utility. Follow the instructions for the exact model if the touch device does not appear.

2. Assign the input to the intended monitor

In Settings → System → Display, arrange your screens and set their orientation. If the Windows touch setup applies to your device, open Tablet PC Settings in Control Panel and choose Setup, then Touch input if prompted. Follow the on-screen directions and touch the physical screen you want to assign. For a vendor-managed installation, use its monitor assignment or alignment utility.

3. Calibrate and confirm the result

With the touchscreen selected, use Calibrate in Tablet PC Settings if available. Follow the targets and save the result. On an Elo installation that uses EloConfig, use the calibration option shown for that controller and follow its prompts. On a test desktop, tap near each corner and the center, then drag across the screen to verify tracking. Recheck mapping and alignment after changing orientation or replacing a monitor.

For example, if touching the second display moves the cursor on the first, run the monitor assignment step first. If a narrow strip still ignores touches on an infrared overlay, inspect the frame. Troubleshoot dead strips and false touches.

Microsoft Device Manager guidance · Dell Windows touchscreen calibration · Elo Windows driver and alignment guidance

Lire ce guide en français.

Ler este guia em português.

Přečíst návod v češtině.