fTPM vs. discrete TPM for Windows 11

A supported firmware or discrete TPM can satisfy Windows 11's TPM 2.0 requirement. Check what Windows sees on your exact PC before changing its firmware or ordering a module.

How the TPM is implemented

Firmware TPM (fTPM)

TPM functions run in a trusted environment provided by the platform. Firmware menus can identify them as AMD fTPM or Intel PTT. Check the PC maker's firmware documentation for the exact board and BIOS release.

Discrete TPM (dTPM)

A dedicated chip provides TPM functions. A board can use a soldered chip or support a separate module. If the board accepts a module, confirm the manufacturer's approved part number and firmware support before buying it.

Some platforms integrate dedicated TPM hardware into a larger package. Windows can use any compatible implementation. A project can still specify a discrete chip or certification as a separate procurement requirement. Microsoft TPM implementation guidance

Check TPM 2.0 in Windows

  1. Press Windows + R, enter tpm.msc, and open TPM Management.
  2. Check that the TPM is ready and that Specification Version reads 2.0. Record the PC model, board revision and firmware version alongside the result.
  3. If Windows reports no compatible TPM, consult the board maker's firmware instructions. The option may be called Security Device Support, Intel PTT or AMD fTPM. Check the result again after any approved change.

Verify the rest of Windows 11's requirements separately, including a supported processor and UEFI firmware with Secure Boot capability. Before changing a legacy boot configuration, have your administrator verify the disk layout and plan the UEFI migration. Microsoft TPM setup · Windows 11 requirements

Prepare BitLocker before a change

Replacing a motherboard or switching between TPM implementations can prompt for BitLocker recovery. If the drive uses BitLocker or Windows Device Encryption, confirm that your administrator can retrieve the recovery key for that specific device. Follow the approved maintenance procedure for suspending and resuming BitLocker when the change calls for it. Check that protection is active after maintenance.

Keep the existing TPM configuration when it meets your requirements. Clear the TPM only as part of an approved recovery or reprovisioning procedure because it can remove keys and credentials tied to that TPM. Microsoft BitLocker recovery guidance

Specify the configuration on a replacement PC

Ask for the exact system and board revision, firmware release, TPM implementation, and a tpm.msc result showing a ready TPM 2.0. If purchasing requires a discrete module or a particular certification, put that requirement in the specification before ordering. See how to submit an industrial PC sourcing request.