AutomateDirectUSA
ADU-DPC2480
ADU-DPC2480
Normaler Preis
$216 USD
Normaler Preis
Verkaufspreis
$216 USD
Versand wird beim Checkout berechnet
Anzahl
Verfügbarkeit für Abholungen konnte nicht geladen werden
ADU-DPC2480 Digital Controller Box
4-channel, 24 V LED controller with 256-level dimming, ≤10 µs trigger delay, and RS-232 control
⬇️ Download Full Spec Sheet (PDF)
Highlights
- High value, compact DIN-rail controller for 24 V LED lighting
- 4 independent outputs, total output power 80 W (3.34 A total)
- 256-level brightness via front-panel knob or PC (RS-232)
- Constant-on / Trigger / Strobe modes with ≤10 µs delay
- Power-off memory retains settings; built-in over-current protection
- Wide trigger compatibility: 5–24 V, NPN/PNP wiring supported
Key Specifications
| Model | ADU-DPC2480 |
| Channels | 4 |
| Input Voltage | DC 24 V |
| Output Architecture | Constant-voltage 24 V, PWM dimming |
| Total Output Power | 80 W (total current 3.34 A) |
| Brightness Levels | 256 (0–255) |
| Control Methods | Front-panel encoder knob; PC remote via RS-232 (9600 bps) |
| Operating Modes | Constant-On / Trigger / Strobe |
| Trigger Delay | ≤10 µs (T1, T3) |
| External Trigger Input | 5–24 V, NPN/PNP supported |
| Status/Protection | Over-current fault shows “Er03”; clear by restart or reset cmd |
| Memory | Auto-save on power-off |
| Environment (Operating) | 0–50 °C; 20–85%RH (non-condensing) |
| Environment (Storage) | 0–60 °C; 20–85%RH (non-condensing) |
| Mounting | DIN-rail base |
Front-Panel Logic & Strobe Behavior
- H-mode (constant state): set via encoder knob — H1 = normally ON; H0 = normally OFF.
- P-mode (strobe): press the knob to toggle strobe state — P0 enters strobe; P1 exits strobe.
- Timing (page 2 sequence chart): Trigger-on delay T1 ≤ 10 µs, light-on duration T2 (settable 0–255 ms), trigger-off delay T3 ≤ 10 µs.
- Wiring: Supports NPN/PNP trigger schemes (see page-2 diagrams); TRIG “+” accepts 5–24 V.
Typical Applications
Multi-channel control of machine-vision bar, ring, or backlights; high-speed inspection with precise strobe timing; PLC-triggered stations; PC-controlled test setups over RS-232.
Specification
Specification
Dimensions
Dimensions
Share
