Linear motion, bearings and guides
Linear guides, bearings, ball and lead screws and actuators: load, life, mounting and lubrication.
Latest articles
Comparison
Ballscrew vs Zero-Backlash Leadscrew for Aluminum Milling
Keep the ballscrew machine. A zero-backlash leadscrew is a sliding nut with a spring, and it holds zero backlash only while axial cutting force stays below that spring preload; a ballscrew's preload is geometric and holds under climb-cut load. The 1 in. screws and granite-epoxy base also out-stiffen 0.5 in. screws in cast aluminum, rotary table or not.
Troubleshooting
Fixing Ballscrew Thrust Bearing Axial Play and Preload
Measure screw end, bearing housing and table movement separately under a reversing axial force. If 0.0002–0.0003 in of play remains between the screw end and the base after the locknut is correctly tightened, the matched back-to-back set has lost its preload: replace it as a set. Shimming the outer rings without the mounting drawing is not a controlled fix.